xerox 19791108 Ethernet Plans free download

File name 19791108_Ethernet_Plans.pdf

Inter-Office Memorandum To Fairbairn, Kay, Ingalls, Goldberg, Shoch Date November 8, 1979 From Larry Tesler Location Palo Alto Subject Ethernet Plans Organization PARC/SSL XEROX Hardware Bruce and I have verified empirically that the 8086 can keep up with the burst of data at the beginning of an Ethernet packet. This includes WAITing for a packet to start, checking the destination host number for "broadcast" or "me", and storing the whole packet into main memory. \Ve had to use a software FIFO; that is, we interspersed ~AOVW instructions into the pre-REP instruction stream to keep ahead of the hardware. We may have been too conservative, so the FIFO may be able to go away in the real thing. (Note: The tests Doug and Dan did were invalid because they ANDed "broadcast" to "me" instead of ~Ring; they stored into local memory instead of into main memory; and they had other minor bugs. Does anyone want to 'critique our tests?) I have thought of one improvement to the board. If, after turning on the receiver, the software could have the option, instead of going into a WAIT, to just get interrupted at the next start-of- packet; and if the first word of the packet were kept in the buffer until it was read by the 8086 (even in the face of other stuff from the wire pounding on it to move over); then, although we would surely miss the rest of the packet; we could discover that someone was trying to tell us something and we could then go into a real listen loop hoping for a retransmissioll. \Vith t..~is capability, we could use the 8086 for other purposes when the host machine had no intention to use the Ethernet, but still respond to unexpected requests from other hosts. \Ve have agreed that the Notetaker I Ethernet board should be readied for stitchweld now, but not actually stitchwelded until PUP Level 0 software is essentially completed. 'The latter will probably happen around the end of the year. By doing a N otetaker I Ethernet board (or several), we hope to get early experience that should greatly benefit both the Notetaker II Ethernet design and all future Notctaker Ethernet software. Software Jim Althoff has agreed to start writing Notetaker Ethernet software December 1. He will work almost half-time for several months implementing board diagnostics, PUP Level 0, PUP Levell, and finally some higher level protocols. We expect to discover hardware problems in the proccss. Jim will report them to Doug and Ron promptly. Jim has other network and process scheduler projects to keep him busy while he is waiting for any hardware fixes to be done. (W c have takcn Jim off the BSP project and h